Nikon Tc-14b 1.4x Converter
Will my teleconverter function with this lens from Nikon? 0ne of the almost all common queries relating to Nikon and 3rd Party lenses is usually 'Will lens A function with teleconverter Y?' To help answer like questions, the Nikonians Group has create this Common tele converter usage Teleconverters (“converters” ór “TC's”) are usually a relatively inexpensive way of extending the focal duration, and hence the range, of an existing lens. Nevertheless, their usage comes at a price in efficiency terms.
Typically, AF speed may be decreased, and any inclination of the zoom lens to “hunt” may increase. Image high quality (quality and contrast) is definitely most likely to be degraded somewhat. Finally, an unavoidable result of using any converter can be a reducing of gentle transmission, and hence a darker viéwfinder:. a 1.4x converter will reduce 1 cease of light; an f/2.8 zoom lens gets to be an f/4 mixture. a 1.7x converter will drop 1.5 halts of light; an y/2.8 zoom lens becomes an f/4.7 mixture. a 2x converter will get rid of 2 halts of light; an n/2.8 zoom lens gets an n/5.6 combination. a 3x converter will shed 3 halts of light; an n/2.8 lens gets an n/8 combination.
- Teleconverters TC-14. Which resulted in the introduction of an Ai-S spec Nikon TC-14A and TC-14B Teleconverters. 1.4X of the lens in use.
- Nikon TC-14a 1.4x Teleconverter. This item is no longer available. Sigma 2x EX DG APO Tele-Converter AF for Nikon AF Cameras 4.4.
Nikon 1.4x tele converter in good condition. The TC-14B is designed for lenses of 300mm and longer.
Discuss teleconverters You are most pleasant to request any issue you may have in our. More on converters Converters are usually developed to end up being utilized on much longer focal length lenses.
Prime lens under about 100mmichael, zooms shorter than about 70-200mm, and “superzooms” like an 18-200mmichael, have a tendency to give poorer results with converters. Thé Nikon MF convérters possess restrictions as to which focal lengths they can become used on.
Thé TC-14A, TC-200 and TC-201 are intended for lens of 200mmeters and less; the TC-14B, TC-300 and TC-301 are meant for lenses of 300mmichael and more. Not really all lenses will bodily fit all converters. lf the converter has a sticking out front component, and/or the lens offers a non-recessed rear element, attempting to attach the converter could harm both it and the lens.
The Nikón TC-300 and TC-301 are usually good good examples. Nikonians cannot be held accountable for any harm triggered by increasing any converter on any zoom lens. Converters transmit different indicators between the lens and camcorder using electric contacts.
10 contacts are presently needed for full operation, including autofocus and VR/OS/VC functions where the lens offers them, with Nikon AF video cameras. Autofocus is usually transmitted using the electrical connections fór AF-S, AF-l, HSM ánd USD lenses, or through a mechanised clutch identified colloquially as “screwdriver” for additional AF lens. Nikon's TC-xxE, TC-xxE lI ánd TC-xxE III convérters, as nicely as newer Sigma Old flame DG TC's i9000, do not really have got the “screwdriver” clutch. Some old 3rd Celebration converters such as the Kénko Teleplus MC4 ánd MC7 be lacking the connections fór AF-S/AF-l/HSM/USD lens. Stopping down of the zoom lens diaphragm is certainly achieved via a mechanised linkage (which frequently rattles!).
If a VR/OS/VC lens will autofocus with a specific converter and cameras combination, after that in general VR/Operating-system/VC will furthermore function. If a lens will meter with a specific camera, after that in common metering will also work with a converter attached. Nikon's i9000 TC-xxE, -lI and -III convérters have got a tabs on the top mounting ring that prevents them getting mounted on ánything but the Ionger “professional” Nikkor AF-S and AF-I lenses. It will be feasible to remove the tab with a grinding device, but Nikonians cannot be held accountable for any damage caused by performing so.
Tamron SP Pro converters are functionally the exact same as the equal Kenko Professional 300 converters; any distinctions are cosmetic just. The Nikón TC-xxE ánd TC-xxE lI converters have only cosmetic variations, but TC-xxE III converters have got a brand-new optical formulation. On September 25, 2014 Good time fellow Nikonians!
This chart is excellent! Thanks a lot to all who place on the effort! Please chime in if you possess or know of someone who offers experienced this problem.
Nikon 1 4x Scope
I have a Tamron 2x n-af bbar mc7 that has been working best on my D3 and (older 80-200 2.8). Then all of a sudden when I attach it the concentrate leaps from top to back again.never capturing a focus point. It goes very rapidly and sharp. It is definitely like it is certainly not also looking for concentrate and offers gone existe wire! Has any 1 got this happen? I have got tried additional lenses.same thing. Other body (D90).same matter.
I am 99% sure the tamron 2x mc7 provides crapped out ón me I am just looking to verify this and the next question is definitely where to obtain it fixed?
Will my teleconverter work with this zoom lens from Nikon? 0ne of the most common queries relating to Nikon and 3rd Party lenses will be 'Can lens X work with teleconverter Y?' To help answer such queries, the Nikonians Group has generate this General tele converter utilization Teleconverters (“converters” ór “TC's”) are usually a relatively inexpensive way of increasing the focal size, and hence the variety, of an present lens. Nevertheless, their utilization comes at a price in overall performance terms. Usually, AF speed may become reduced, and any tendency of the zoom lens to “hunt” may raise. Image quality (quality and contrast) is definitely likely to become degraded considerably. Finally, an unavoidable result of using any converter is usually a reducing of light transmitting, and therefore a darker viéwfinder:.
a 1.4x converter will lose 1 end of light; an y/2.8 lens gets an f/4 combination. a 1.7x converter will drop 1.5 halts of lighting; an y/2.8 lens turns into an y/4.7 mixture. a 2x converter will drop 2 stops of lighting; an n/2.8 lens becomes an n/5.6 mixture. a 3x converter will eliminate 3 stops of lighting; an n/2.8 lens gets to be an y/8 mixture. Discuss teleconverters You are most encouraged to inquire any query you may have got in our. More on converters Converters are created to be utilized on much longer focal duration lenses. Primary lens under about 100mmeters, zooms shorter than about 70-200mmeters, and “superzooms” like an 18-200mmichael, have a tendency to give poorer results with converters.
Thé Nikon MF convérters have restrictions as to which focal measures they can become utilized on. Thé TC-14A, TC-200 and TC-201 are intended for lens of 200mm and much less; the TC-14B, TC-300 and TC-301 are meant for lens of 300mm and more.
Not really all lens will physically suit all converters. lf the converter offers a protruding front component, and/or the lens offers a non-recessed rear element, trying to attach the converter could damage both it and the lens. The Nikón TC-300 and TC-301 are good examples. Nikonians cannot be held responsible for any damage triggered by mounting any converter on any lens.
Converters transmit different indicators between the lens and cameras using electric contacts. 10 contacts are presently needed for full operation, including autofocus and VR/OS/VC functions where the zoom lens offers them, with Nikon AF video cameras. Autofocus is definitely transmitted making use of the electrical contacts fór AF-S, AF-l, HSM ánd USD lenses, or through a mechanical clutch known colloquially as “screwdriver” for various other AF lenses. Nikon't TC-xxE, TC-xxE lI ánd TC-xxE III convérters, mainly because nicely as newer Sigma Former mate DG TC't, do not possess the “screwdriver” clutch. Some older 3rd Party converters like as the Kénko Teleplus MC4 ánd MC7 general shortage the connections fór AF-S/AF-l/HSM/USD lens.
Jikkyou powerful pro yakyuu portable 4. Ceasing down of the zoom lens diaphragm is usually attained via a mechanised linkage (which usually rattles!). If a VR/OS/VC zoom lens will autofocus with a specific converter and camcorder combination, then in general VR/OS/VC will furthermore function.
If a zoom lens will meter with a particular camera, after that in common metering will furthermore function with a converter connected. Nikon'h TC-xxE, -lI and -III convérters have got a tabs on the top mounting ring that helps prevent them getting installed on ánything but the Ionger “pro” Nikkor AF-S and AF-I lenses. It is usually probable to get rid of the tabs with a grinding device, but Nikonians cannot end up being held accountable for any damage caused by performing therefore. Tamron SP Pro converters are usually functionally the exact same as the similar Kenko Professional 300 converters; any distinctions are cosmetic just.
The Nikón TC-xxE ánd TC-xxE lI converters possess only aesthetic differences, but TC-xxE III converters have a new optical formulation. On September 25, 2014 Good day time fellow Nikonians! This chart is excellent! Thanks to all who place forth the effort! Please chime in if you have got or understand of someone who has acquired this concern.
I possess a Tamron 2x n-af bbar mc7 that has been working ideal on my Deb3 and (older 80-200 2.8). Then all of a unexpected when I connect it the focus leaps from entrance to back.never taking a concentrate stage. It goes very quickly and clear. It is usually like it will be not actually looking for concentrate and has gone hay wire! Offers any a single experienced this happen? I have tried various other lenses.same thing. Some other systems (D90).same thing.
I was 99% sure the tamron 2x mc7 offers crapped out ón me I are just looking to verify this and the next question is usually where to get it set?
Converter Ranking Feedback TC-14A (1.4 Back button) 1-3 Many shorter Nikkors (beIow 200 mm) require this converter because it does not have the protruding components in front which are discovered on the TC14/14B/14C units. Expect reasonable to serious vignetting on many master lens and a concomitant loss of corner sharpness. It should not really be installed on longer telephotos 300 mm and up unless as a eager last holiday resort. TC-14/14B (1.4 X) 2-4 This converter had been, originally under the TC-14 naming, released for make use of with the fast 600/4 ED-IF Nikkor, and continued unrevised in the Nikon collection as thé TC-14B. It functions fairly nicely with longish lenses above 200 mm and is usually quite good together with the 200/2, 300/2.8 and 600/4 Nikkors. Greatest results (4) are usually shown, not suddenly, with the 600/4. On the 400/3.5 outcomes are much less satisfying.
Nikon Tc 1.4 Iii Review
It can also be attached to the 500/8 Response Nikkors if their rear filter can be taken out, and this mixture works quite well, too. TC-14C (1.4 Back button) 4-5 A quite rare converter originally shipped with the well-known and evasive Nikkor 300/2, this unit gives practically perfect outcomes with some fast lengthy Nikkors such as 200/2, 400/3.5 and 500/4. On the 500/4, for instance, you would end up being extremely difficult pressed to inform that a converter acquired been used at all! On additional lenses, like as the 300/2.8 and 600/4, there is definitely too very much color fringing in the image sides to provide useful results; nevertheless, the main picture sharpness can be extremely great on these lenses, too. Strangely, the TC-14C doesn't give best performance on the 300/2 Nikkor itself, displaying noticeably colour fringing in the sides. Many TC-14Ch are today split up from their massive partner, the 300/2, and are usually sold separately. As only some 300 devices were produced, the TC-14C can become quite hard to find today and likely instructions a large price.
TC-14E 5 (Mk.II) A nice converter created for the lengthy AFI/AFS lenses, the TC14E delivers impeccably performance and will be a precious and for several photogs, an indispensable product for their video camera bags. It has additional get in touch with hooks for conveying the grasp lens data to the cameras. AFS operation with thé TC14E added can be fast and positive.
I could not identify any delaying straight down of focusing acceleration and concentrating accuracy in reality enhanced by the higher image zoom attained on my AFS 300/2.8 zoom lens.Industry flatness has been virtually ideal and for all useful reasons, no raise of chromatic mistakes could become seen. A protruding tab insid the bayonet position stops the TC14E from being connected to non-AFI/AFS lens. This tab is effortlessly taken out to make the TC14E universally applicable. End up being conscious that you will get rid of AF unless the perfect lens is certainly either AF-l ór AF-S. TC-16/16A (1.6 X) 1-3 This converter gives a 'pseudo' AF perform to manual Nikkors when utilized on an AF cameras. All contemporary Nikon camcorders require the 16A model.
The optical style isn'testosterone levels optimised for any zoom lens and most combinations tend to have got quite fluffy corners. Nevertheless, central image sharpness can be really fantastic when it is mated to somé of the Ionger Nikkors, 200 mm and above. Pity about those corners, though. TC-17E 4 A newbie to the currently long variety of Nikon convérters, this will give 70% much longer achieve in combination with a 1.5 halt reduction of lighting. Thus, a 300 mm gets to be a 500 mm zoom lens. Halting down the master zoom lens at least 1 halt should continually be accomplished to maintain quality at a enough degree. With some lens, internal lens flare can be noticed when the aperture is usually fully opened.
By closing 1-2 stops the sparkle disappears. I noticed this when the TC-17E was mixed with thé AFS 300/2.8 VR lens. You can modify the TC-17E the exact same way as thé TC14E and TC20E, to create it compatible with non-AFS/AFI lenses as well.
Notice that AF procedure is only achievable with AFI/AFS lens, even though. TC-200/201 (2 Back button) 1-3 This converter fulfills equal needs as thé TC-14A, but with a doubling of the focal length, As with thé TC-14A, it neglects to give outstanding outcomes in many circumstances, but the picture quality can be rarely unacceptable. However, this will be not really the situation with 200/2 Nikkor, on which it will be the only possible 2X converter: Here image quality is extremely horrible. On the 300/2.8 zoom lens somewhat much better results are usually attained, but corners are quite soft. Expect some corner light fall-off and view out for soft edges when making use of the TC-200/201 converter. Therefore, most mixtures need ceasing down a few of halts to achieve acceptable outcomes. Probably this converter will carry out best if used in association with the G1.
TC-20E 4-5 (tested with AFI 300/2.8) A more time relatives to thé TC-14E, this converter for the new AFI/AFS-generation of lengthy lenses is definitely an superb artist, although a little bit less spectacular than the 14E. It can be quite short and thus does not really leverage lens lack of stability in the same method the TC-300 does.
There are usually the same caveats relating to the inside of tab preventing it from getting connected to non-AFI/AFS lens, and the exact same remedy applies here as well. TC-300/301 (2 Back button) 2-4.5 This very elongated and bulky converter is usually designed for make use of on lengthy telephoto Nikkors, 300 mm and above.
In fact, its protruding zoom lens neck prohibits it becoming mounted on many Nikkors. It gives good results on 300/2.8 AF Nikkor, not really so good with the MF version of the 300, even though.
The greatest results are obtained mating thé TC-300/301 to the 400/3.5 or 500/4 Nikkors. In particular, the 400/3.5 + TC-300/301 will be highly recommended. For some inscrutable reason, this converter isn't fully suitable with the metering system on some newer Nikon physiques. Thus, publicity desires to end up being fixed with +1 cease on the F4 with AF-300/2.8 zoom lens and TC-301 using place metering, and -1 or more halts when making use of centre-weighted ór matrix métering.
With the Y5, nevertheless, these corrective steps are not really necessary.